Skip to main content
Infineon LogoInfineon Logo
ModusToolbox™ Documentation
HomeCommunity
  • Introduction
  • Getting started
  • IDEs
    • Eclipse for ModusToolbox user guide
    • Visual Studio Code for ModusToolbox™ user guide
    • Keil µVision for ModusToolbox user guide
    • IAR Embedded Workbench for ModusToolbox user guide
      • About this document
      • Download/install software
      • Create/export application for IAR Embedded Workbench
      • Miscellaneous notes
        • Supported debugger probes
        • Configure applications with C++ files
        • Build options, and prebuild/postbuild settings
        • Enable softfp VFP mode
        • RTOS settings
        • Patched flashloaders
        • Perform ETM/ITM trace
        • Multi-core toolbar and CTI usage (I-jet and CMSIS-DAP only)
      • PSOC™ Control C3 secure application
      • PSOC™ Edge E84 multi-core application
      • PSOC™ 4 and PSOC™ 6 single-core application
      • PSOC™ 6 and XMC7000/TRAVEO™ II multi-core applications
      • PSOC™ 64 secure single-core application
      • AIROC™ CYW20829 application
      • Make application changes and re-export
      • Revision history
  • Base tools
  • Programming tools
  • Configurators
  • Additional packages information
  • Device support libraries
  • Middleware
  • Device-family-specific documentation
  • Device TRMs
  • Disclaimer

Miscellaneous notes

This section covers general instructions that may or may not pertain to your device and application.

  • Supported debugger probes

  • Configure applications with C++ files

  • Build options, and prebuild/postbuild settings

  • RTOS settings

  • Patched flashloaders

  • Perform ETM/ITM trace

  • Multi-core toolbar and CTI usage (I-jet and CMSIS-DAP only)

Last updated on Nov 5, 2025
Previous
Create/export application for IAR Embedded Workbench
Next
Supported debugger probes
Docs
  • Disclaimer
  • Privacy Policy
  • Terms of use
© 1999-2025 Infineon Technologies AG